Powered caliper for aiShell 9.7, 10, and mini
- Powered iPad cradle
- Allows waterproof, wireless charging of aiShell Air, aiShell 9.7, aiShell 10 and aiShell mini/mini+ cases
- See compatibility guide
- Shipments at 12 PM from Monday to Friday.
- Possible returns within 30 days (see conditions)
- Secure payment by card or bank transfer.
Important: this cradle is sold on its own, without the ball shown in the illustrations. It can be fitted to any RAM articulated arm in our catalog. The arm itself can be mounted on a tube base or suction cups (see example in main photo with medium arm and vise base). These items must be ordered separately.
Presentation
A revolution for iPad use on boats and in all other demanding environments: the Car Cradle powered bracket enables both the attachment and wireless recharging of an iPad, in a totally waterproof way!
The Car Cradle powered bracket is first and foremost a highly reliable mounting cradle, inspired by the quick-fit brackets already offered by the same manufacturer (Andres Industries). It allows the iPad to be attached/extracted withjust one hand, while ensuring exemplary hold even under severe shock and vibration conditions.
But the special feature of this stand is that it can also be used to recharge the iPad. It is supplied with an end cap that can be attached to the case and replaces the usual charging cable. A gasket and two screws ensure a perfect seal at this point.
When the iPad is placed in its clamp, the end cap makes contact with the gold contacts integrated into the clamp, allowing the current to pass through.
The Car Cradle must be connected to an iPad-compatible USB charger (original charger, cigar lighter or - better still - a waterproof socket).
The Car Cradle allows you to charge your iPad continuously outdoors, while retaining complete freedom of movement, since no cables are attached to the case!

Installation
Installation should be carried out close to an iPad-compatible USB socket (2.1A current), so that the USB cable can be plugged in ( reinforced cable with type A male USB socket).
The Car Cradle can be mounted :
- either directly on a wall
- or (preferably) on an articulated arm (not supplied) for better orientation.
The Car Cradle can then be attached to the boatusing a base tube or suction cups. By way of example, the assembly shown in the photo above comprises the Car Cradle, a medium arm and a collar base. The Car Cradle is supplied with all the stainless steel screws and bolts required to screw it onto a RAM articulated arm.
Features
- Adjustable in 2 positions
- Dimensions for aiShell Air / 9.7 / 10: approx. 30 x 11 x 7cm
- Dimensions for aiShell mini and mini+: approx. 26 x 11 x 7 cm
- End cap: depth 15mm (when mounted) / weight: 9g
- Reinforced power cable with USB type A plug. Choice of length: 1m or 1.8m
- Plastic material
- For aiShell mini / mini+ / aiShell Air / aiShell 9.7 / aiShell 10 shells (see compatibility guide)