Previous
Next

Calypso NMEA Connect Plus

€274.00
Tax included
  • NMEA0183 and/or NMEA2000 Bluetooth adapter for Calypso wind vane
Out-of-Stock
  • Shipments at 12 PM from Monday to Friday.
  • Possible returns within 30 days (see conditions)
  • Secure payment by card or bank transfer.

Presentation

The NMEA Connect Plus is a small electronic box designed to work with the Calypso Ultrasonic wind vane. With NMEA inputs and outputs and a Bluetooth wireless module, it extends the possibilities of this device even further!

NMEA Connect Plus is available in 3 variants, selected above:

  • 0183+BT: to connect a Calypso Bluetooth windvane and relay the signal as NMEA0183 + Bluetooth
  • 2000+BT: as above, but with the signal relayed as NMEA2000 + Bluetooth
  • Highend: converts the signal to 0183, 2000 and Bluetooth

All models also feature an integrated wifi server for accessing the settings page from any device with an internet browser, and a USB port for firmware updates.

How it works :

Calypso'sUltrasonic Portable is a fully autonomous wireless wind vane/anemometer, enabling wind information to be easily viewed on a mobile or tablet while sailing. While this system is remarkably simple yet powerful, it is not designed for direct integration with on-board NMEA instrumentation.

That's where NMEA Connect Plus comes in: by converting Bluetooth signals into NMEA information, it enables wind data to be sent to on-board displays or to an autopilot. In this way, the windvane behaves just like a traditional wired windvane, but can still be consulted on a cell phone!

Last but not least, NMEA Connect Plus can also be used as a simple relay to extend the windvane' s Bluetooth range, adding around 20m to it!

Example of use alone:

NMEA Connect Plus acts as a Bluetooth relay + sends wired information to the NMEA network

Another advantage: with NMEA Connect Plus, you can connect 2 Bluetooth devices to the same windvane, which is not possible with the windvane alone.

Example of use with a multiplexer:

If you have a Wifi multiplexer in your installation, you can connect the NMEA Connect Plus to this multiplexer, and thus receive wind data, in Wifi this time, on several mobiles/tablets, while circulating them in the onboard NMEA network.

Specifications

  • Dimensions: 93.3mm x 112.54mm x 35.30mm
  • Weight: 100g
  • Supply voltage: 9-24V
  • Max. current: 150mA@12V
  • Waterproofing: IP68
  • Bluetooth range: 50m
  • 2 NMEA ports usable as input or output, baud rate configurable: 4800-38400
  • USB port
  • Integrated Wifi server
Reference CAL-NCP

Our shop uses technical cookies to improve the user experience and we thank you for accepting their use to fully enjoy your browsing. These cookies are not used for advertising purposes. Thank you for your understanding.